LED RECHARGEABLE LIGHT with MOTION SENSOR VIDEX VL-NL135B

LED Rechargeable Light with motion sensor VIDEX VL-NL135B is designed for convenient local lighting of living spaces, cabinets, bookshelves, and other areas where additional illumination is required. Thanks to the built-in motion sensor, the light can automatically illuminate a specific area when movement is detected. This model allows you to adjust the brightness level and change the light color temperature: Warm White (3000K), Neutral White (4000K), and Daylight (6500K). The light can be hung using the built-in hook. It can also be easily attached to metal surfaces with the built-in magnet or mounted on non-metal surfaces using the adhesive metal pad included in the package. LIGHT FEATURES AND ADVANTAGES: - flexible adjustment of lighting operation modes - built-in Li-pol battery 3.7V, 1800mAh - USB-C charging - charging time – 2 h 30 min - built-in infrared PIR motion sensor - sensor detection angle: 120° - detection distance – 4-6m - luminous flux – 120Lm (Max) - adjustable color temperature: 3000K / 4000K / 6500K - power – 1.5W - operating time – up to 9 hours PACKAGE CONTENTS: 1. LED light 2. Charging cable 3. Adhesive metal pad 4. User manual CONTROL INSTRUCTIONS: The slider switch located on the side of the light housing allows you to turn the light on and off and activate the motion sensor mode. 1) To turn on the light, move the slider switch to the "ON" position. 2) To activate the motion sensor mode, move the slider switch to the "AUTO" position. In this mode, the light turns on when motion is detected and automatically switches off approximately 20 seconds after movement is no longer detected. 3) To turn off the light, move the slider switch to the "OFF" position. Brightness and color temperature adjustment are controlled using the function button located on the front of the light housing. - Changing the light color: when the light is switched on, short press the function button to switch between available color temperatures: Warm White (3000K), Neutral White (4000K), and Daylight (6500K). Pressing the button after the Daylight mode switches the light off. - Brightness adjustment: when the light is switched on, press and hold the function button to adjust the brightness level. When the maximum or minimum brightness level is activated, the light flashes once. CHARGING: Connect the USB-A end of the charging cable to a power adapter and the other end to the charging port of the light. During charging, the indicator lights red. When fully charged, the indicator turns green. It is recommended to fully charge the battery before the first use. Prolonged use of the light while it is charging is not recommended, as it may negatively affect the battery's performance. During long-term storage, it is recommended to recharge the battery regularly at least once every 3–4 months to extend its service life and prevent complete discharge. Store the product in a dry place away from direct sunlight. The warranty period is 2 years.